Static tests   Dynamic tests
CPT/CPTU DPH, DPSH DPL, DPM
Rods Rods Rods
Probes Cones Cones
Selectors Casings Casings

 

Static Penetrometers (CPT/CPTU test) 

top

 
Rods - CPT/CPTU test
001619 ø 50 x 1000 outer rod- alloy steel

000829 ø 36 x 1000 outer rod- alloy steel
000567 ø 36 x 1000 outer rod with enlarging ring - alloy steel
000836 ø 15 x 1000 inner rod (CPT with mechanical tip) - alloy steel
000568 Conical threaded head to pull up ø 36 mm rods
000576 ø 40 mm enlarging ring
000854 ø 50 mm enlarging ring

top


Probes - CPT test
000805 Begemann tip

000809 Mantle cone -  (point resistance only) - M1

top


Load cells (mechanical CPT) - CPT test  - See description
000645 10 t load cell with manual selector
001008 20 t load cell with manual selector

 


Dynamic Penetrometers (DP test)
top Rods - DPH, DPSH test
000869 ø 34 x 1500 hollowed rod - M22

001368 ø 34 x 1200 hollowed rod - M22
000868 ø 34 x 1000 hollowed rod - M22
000877 Nipple for ø 34 mm rod - M22
000884 ø 32 x 1000 mm rod -M22
000885 ø 32 x 900 mm rod -M22
000596 Nipple for ø 32 mm rod - M22
top


Cones - DPH, DPSH test
000879 20 cm2 short solid cone, apex angle 60° - M22

000880 20 cm2 standard solid cone, apex angle 60° - M22
000881 20 cm2 standard solid cone - M22; apex angle 90°
000570 20 cm2 expendable cone for ø 34 mm rod; apex angle 60°
000569 20 cm2 expendable cone for ø 32 mm rod, apex angle 60°
001422 20 cm2 expendable cone for ø 32 mm rod, apex angle 90°
top


Casings - DPH, DPSH test
000873 ø 48 x 1500 mm

000876 ø 48 x 1000 mm
000875 ø 48 x 900 mm
000560 Nipple for ø 48 mm casing
000549 Casing’s cutting shoe for ø 34 mm rod
000550 Casing’s cutting shoe for ø 32 mm rod
top
Rods - DPL, DPM test
001447 ø 22 x 1000 mm - M16

000561 ø 20 x 1000 mm - M14
top
Cones - DPL, DPM test
000849 10 cm2 solid cone, for ø 20 mm rod, apex angle 60°
001448 10 cm2 solid cone, for ø 22 mm rod, apex angle 60°
000562 10 cm2 expandable cone for ø 20 mm rod, apex angle 60°
001450 10 cm2 expandable cone for ø 22 mm rod, apex angle 90° - M16
top
Casings - DPL, DPM test
000872 ø 33 x 1000 mm

000871 ø 33 x 600 mm
000891 Nipple for ø 33 mm casing
000878 Cutting shoe for ø 33 mm casing