TG 63-150

Price from € 35.320,00
Tests CPT - CPTU - SCPTU - DPH - DPM - DPSH - SPT
Version CPT - CPT+DP

DESCRIPTION

TECHNICAL DATA

DETAILS

CONFIGURATIONS

CERTIFICATIONS

Static and/or dynamic penetrometric tests in a single device

The TG 63-150 penetrometer can be configured on request to perform static penetrometric tests (CPT), or both static (CPT) and continuous dynamic (DP) penetrometric tests. As regards the dynamic tests, depending on the most commonly tested soil types, the penetrometer can be equipped with different hammer systems (DPSH super heavy, DPH heavy, or DPM medium). It also allows disturbed samples to be taken, as well as undisturbed samples which permit better stratigraphic interpretation. The TG 63-150 sets itself apart with its high energy efficiency. Indeed, around 78% of the energy is transmitted to the rods. It guarantees perfect verticality when driving in the rods. It reduces testing times by allowing the rods and their liner tubes to be driven into the ground at the same time. It makes removal of the entire rod possible. It features an anchoring system installed on the mast which allows machine positioning times to be significantly reduced, along with the stress when driving the test equipment into the ground. The TG 63-150 penetrometer features a hydraulic tracked carriage which offers excellent manoeuvrability, even on uneven terrain. It can even be positioned on very steep slopes thanks to its three stabilisers, and the mast can be tilted continuously, meaning it is always perfectly vertical. It is a highly flexible machine, which can be used by one single operator. Static penetrometric tests can be performed with a mechanical bit (Begemann) and manual acquisition (CPT), or using different (optional) bits such as the piezocone (CPTU) or seismic piezocone (S-CPTU) which offer a more reliable stratigraphic interpretation and determination of the profile of the speed of the shear waves (Vs). The static/dynamic method allows information to be obtained along verticals composed of terrain with different mechanical characteristics (from very soft to very hard and compact), while it is possible to overcome particularly hard strata thanks to a rotary head which allows pre-drilling (optional).

Technical Data
Engine Type Pertrol; 2 cyl.; V Diesel; 2 cyl.
Power [HP (kW) – RPM] 18 (13.5) – 3600 18 (13.5) – 3600
Cooling Air Water
Travel Tracked, with hydrostatic transmission Tracked Wheeled
Travel speed [km/h] 0 ÷ 2
Max. slope % 25
Hydraulic
pump
Number of pumps 2
Max. operating pressure [bar] 240
Stabilizers Number 3
Type Hydraulic

Cpt

  • Max. operating pressure [bar]: 240
  • Driving (insertion) force [kN]: 150
  • Extraction force [kN]: 160
  • No-load driving (insertion) speed [cm/sec]: 0 ÷ 10
  • No-load extraction speed [cm/sec]: 0 ÷ 7.5
  • Stroke [mm]: 1250

Anchoring

  • Hydraulic motors with reduction unit: 4
  • Torque [kgm]: 160
  • Anchoring system: modular helical rods
  • Helical rods Ø x L [mm]: 100 x 750

Our machines are CE certified and compliant

As shown by the certifications we have attained, the specifications of our machines have undergone verifications and have been found to comply with CE directives in order to guarantee users safe cutting-edge products.

Available versions

CPT

CPT + DP

Standard:TG-63-150-Statico-(CPT)

  • CPT
  • 150 kN

Optional:

  • Rotary head

PETROL
Weight (kg): 1000

DIESEL
Weight (kg): 1060

Standard:TG-63-150-Statico-Dinamico-(CPT-DP)

  • CPT + DP
  • DPSH + 150 kN

Optional:

  • DPH + 150 kN
  • DPM + 150 kN

PETROL
Weight (kg): 1080

DIESEL
Weight (kg): 1140

For further information, fill out the form.